Latest allen bolt Tenders | Government allen bolt Tenders

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

State Government

CTN :45114509

28 May, 2026 12.04 Lacs

Jaipur - Rajasthan

Tender For supply of screw m3x10 , brass washer ni plated , screw brass pan head m4x10 , screw brass pan head m3x8 ni plated , brass washer 3point2 or 7point0 0point5 , brass nut m3x2point5htx5point5 aorf ni plated , screw m4x20 mm , brass nut m4x3htx8point0 aorf ni plated , m3x5 brass pan head screw ni plated , bakelite washer , ss cap headed philips screw with inbuilt washer , sshexagonal head screw m10x65 , nut m10 ss hexagonal , spring washer ss , allen bolt socket head m 10x40 , screw pan head m3x25 brass ni plated , screw all sock cap m8x25 , screw m3x25mm brass counter sunk , brass washer 15point0 6point5 1point0 ni plated

Central Government / Public Sector

CTN :45109340

21 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For auction sale of pway scrap - ms scrap- 48.320 mt-delivery on actual weighment basis. lot no. 5405 26 05 02 gtl gtl ms ap available with sse p w bg-gtl. scrap cond and u/s released ms scrap consisting of:- 1)ms liners t-3740¿44,325 nos---10.195 mts,2) bolts & nuts off size---593 nos---0.709 mts 3)glued joints 60kg pices u/s593---92 nos---11.040 mts,4)glued joints 52kg pices u/s---35---nos¿03.640 mts,5) plate screw t-3915---844 nos---0.401 mts,6) slide chairs---24 nos---0.468 mts,7) m.s bearing plate of shorts---05 nos---0.293 mts,8)ms scrap (kgs) consisting of below 1 mtr rail pieces,check rail peices, ms boards, miscellaneous scrap ete.) ---06.709 mts,9) m.s. bracket t-6905---20---0.309 mts,10) m.s. bracket t-6906---24 nos---0.504 mts,11) m.s. bracket t-6907---08 nos---0.121 mts,12) m.s. bracket t-6908---08 nos---0.121 mts,13) m.s. bracket t-6932---36 nos---0.504 mts,14) m.s. bracket t-6933---36 nos---0.544 mts,15) m.s. bracket t-6934---72 nos---0.655 mts,16) gauge tie plate---01 nos---0.080 mts,17) 52kg fish plate plates---176 nos---02.746 mts,18) 52kg joggled fish plates---152 nos---02.903 mts,19 single coil spring washers---304 nos---0.015 mts,20) 60kg 1 meter long fish plates---133 nos---03.606 mts,21)60kg joggled fish plates---91 nos---01.820 mts,22) sej check rail---14 nos---0.938 mts total- 48.320 mts. (approx). available at inside of the sse/p.way/bg/gtl office compound guntakal. ss no. g/w/gtl/ms/bg/2026-27/06, dt.16.04.2026. sl no. 1 to 22 and stack no. 1 to 22. hsn code: 72042990 - gst 18%. note to the bidders 1) successful bidder is advised to pay bsv at the earliest and approach all the concerned witnessing officials immediately along with delivery point fixation letter for taking loading to avoid last minute rush and unforeseen circumstances 2) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.3) post auction no representation shall be entertained.4) for photos of this lot, kindly click on view lot image on bottom left side. 5) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description. 6) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 7) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 8) clubbing of the lots, what so ever, is not permitted for loading 9) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 10 railways does not guarantee for quality, quantity description etc.

Central Government/Public Sector

CTN :45114250

18 May, 2026 NA

Ramgarh - Jharkhand

Tender For supply of hex bolt with nut 3 by 4 inch x 6 inch , hex bolt with nut 5 by 16 inch x 2inch , hex bolt with nut 3 by 8 inch x 1 point 5 inch ft , hex bolt with nut 3 by 8 inch x 2 inch ft , hex bolt with nut 3 by 8 inch x 3 inch ft , hex bolt with nut 1 by 2 inch x 1 point 5 inch ft , hex bolt with nut 1 by 2 inch x 2 inch ft , hex bolt with nut 1 by 2 inch x 2 point 5 inch ft , hex bolt with nut 1 by 2 inch x 3 inch ft , hex bolt with nut 1 by 2 inch x 4 inch ft , hex bolt with nut 1 by 2 inch x 5 inch ft , hex bolt 5 by 8 inch x 2 inch ft , hex bolt 5 by 8 inch x 2 point 5 inch ft , hex bolt 5 by 8 inch x 3 inch ft , hex bolt 5 by 8 inch x 3 point 5 inch ft , hex bolt 5 by 8 inch x 4 inch ft , hex bolt with nut 5 by 8 inch x 5 inch ft , hex bolt with nut 5 by 8 inch x 6 inch ft , hex bolt with nut 3 by 4 inch x 3 inch ft , hex bolt with nut 1 inch x 4 inch ft , hex bolt with nut 1 point 1 by 4 inch x 6 inch , hex bolt with nut m6 x 30mm , hex bolt with nut m8 x 100mm ft , hex bolt with nut m10 x 30mm ft , hex bolt with nut m10 x 40mm ft , hex bolt with nut m10 x 50mm ft , hex bolt with nut m12 x 40mm ft , hex bolt with nut m12 x 50mm ft , hex bolt with nut m12 x 60mm ft , hex bolt with nut m12 x 80mm ft , hex bolt with nut m12 x 100mm ft , hex bolt with nut m16 x 50mm , hex bolt with nut m16 x 80mm ft , hex bolt with nut m16 x 100mm ft , hex bolt with nut 16 x 120mm ft , hex bolt with nut m20 x 50mm ft , hex bolt with nut m20 x 70mm ft , hex bolt with nut m20 x 80mm ft , hex bolt with nut 24 x 100mm ft , hex bolt with nut m24 x 150mm ft , hex bolt with nut m24 x 200mm , hex bolt with nut m24 x 120mm ft , hex bolt with nut m30 x 200mm , c s k bolt 3 by 4 inch x 2 point 5 inchft , c s k bolt m16 x 50mm , c s k bolt m10 x 70mm , hex bolt with nut 7 by 8 inch x 12 inch , hex bolt with nut 7 by 8 inch x 14 inch , hex bolt with nut m20 x 250 , ht allen bolt m24 x 120 , hex bolt with nut 7 by 8 x 3 inch , plain washer 5 by 16 inch , plain washer 3 by 8 inch , plain washer 1 by 2 inch , plain washer 5 by 8inch , plain washer 3 by 4 inch , plain washer 7 by 8 inch , plain washer 1 inch , hex nut m20 , hex nut 30mm , hex bolt with nut 5 by 8 inch x 4 point 5 inch ft , hex bolt with nut 1 inch x 10 inch , hex bolt with nut 1 inch x 12 inch , hex bolt with nut m20 x 100 ft , hex bolt with nut 20 x 160 mm , hex bolt with nut m20 x 200 , hex bolt with nut 7 by 8 x 8 inch , hex bolt with nut 7 by 8 x 10 inch , hex bolt with nut 3 by 4 inch x 5 inch ft , hex bolt with nut 3 by 4 inch x 8 inch , hex bolt with nut m30 x 150 mm , hex bolt with nut m30 x 250 , hex bolt with nut m30 x 300 , hex bolt with nut m24 x 250 mm , hex bolt with nut m24 x 300 mm , hex bolt with nut 1 point 1 by 4 x 8 inch , hex bolt with nut 1 point 1 by 4 x 4 inchft , hex bolt with nut m24 x 350 mm , hex bolt with nut m24 x 400 mm , hex bolt with nut m30 x 350 , hex bolt with nut 1 inch x 15 inch , ht allen bolt m12 x 100mm , ht allen bolt m16 x 50 ft , ht allen bolt m14 x 80 ft , ht allen bolt m8 x 100 ft , ht allen bolt m6 x 75 ft

Central Government And Public Sector

CTN :45116924

11 May, 2026 NA

Bengaluru - Karnataka

Tender For supply of high tensile allen bolts of size m20 x 50 mm, fully threaded, conforming to is: 2269, property class 12.9, and as per is 1367, supplied complete with matching nut. approved makes: tvs / lps / upsl / unbrako only. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45116925

11 May, 2026 NA

Bengaluru - Karnataka

Tender For supply of high tensile allen bolts of size m20 x 60 mm, fully threaded, conforming to is: 2269, property class 12.9, and as per is 1367, supplied complete with matching nut. approved makes: tvs / lps / upsl / unbrako only. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45116926

11 May, 2026 NA

Bengaluru - Karnataka

Tender For supply of high tensile allen bolts of size m 16x 60 mm, fully threaded, conforming to is: 2269, property class 12.9, and as per is 1367, supplied complete with matching nut. approved makes: tvs / lps / upsl / unbrako only. [ warranty period: 30 months after the date of delivery ]

CTN :45086303

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.mf-10.exmp.x-2.05.26.28 description- scrap junk/kutchra [any ferrous scrap disintegrated through rust or corrosion tin & galvanised sheeets, strips & cuttings commode chutes, refuse receptacles, heavily corroded & disintegrated sleepers and pcs. etc. all kind rusted corroded drums. scrap expanded metal and wire mesh, rusted or corroded tin & tubelight fittings , all rusted pitted pipes, deformed rusted small structures, very rusted and old nuts, washers and wire spring , packing strips, oil filter, etc. negligeable nf may be attached with some qty & other mf-10 items as in the lot (above material may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

Central Government / Public Sector

CTN :45084420

13 May, 2026 NA

Multi City - Telangana

Tender For auction sale of pway scrap - rails 52 kg - scrap cond. unserviceable rails 52 kg [ferrous scrap], 114 nos. rm 1025.73. stack no. 01 to 04 [total 04 stacks], udm lot no. 014230-25-00001. loc. available at kzj/1347-1377, kzj/1419-1427, kzj/1427-1433, kzj/1449-372/29. note- 1] attached fish plates, joggled fish plates, sej ends, clamps bolts, nuts, glued joints etc., are to be removed and returned to railways. 2] as per railway boards letter dt.23/12/2021, 3 days advance intimation is to be given to rpf for witnessing of deliveries. the same has been reiterated by dsc/rpf/sc vide letter dated 22/09/2025. firms are therefore requested to take this period into consideration while uploading their requests for delivery so that deliveries are completed on time, well within the fdp. delivery by sectional weighment basis. pl.no.98051258. hsn code 72042910. available under sse pway cr kzj, state-tg.

Central Government / Public Sector

CTN :45084421

13 May, 2026 NA

Multi City - Telangana

Tender For auction sale of pway scrap - rails 60 kg - scrap cond. unserviceable released rails 60 kg [ferrous scrap], 303 nos. rm 2082.93. stack no. 01 to 11 [total 11 stacks], udm lot no. 014230-25-00002. loc. available at kzj/1347-1377, kzj/1419-1427, kzj/1429-1437, kzj/1439-1445, kzj/1439-1449, kzj1445-1449, kzj/1449-367/5a, kzj/1449-367/5a, kzj/1449-372/29. note- 1] attached fish plates, joggled fish plates, sej ends, clamps bolts, nuts, glued joints etc., are to be removed and returned to railways. 2] as per railway boards letter dt.23/12/2021, 3 days advance intimation is to be given to rpf for witnessing of deliveries. the same has been reiterated by dsc/rpf/sc vide letter dated 22/09/2025. firms are therefore requested to take this period into consideration while uploading their requests for delivery so that deliveries are completed on time, well within the fdp. delivery by sectional weighment basis. pl.no.98051258. hsn code 72042910. available under sse pway cr kzj, state-tg.

Allen Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors